The Transducer Techniques RTS Series Features Integrated Overload Stops to Prevent Damage to the Torque Sensor

CAL-TEDS Plug & Play Smart Sensors Icon

CAL-TEDS Plug & Play Smart Sensors Icon

RTS Series Reaction Torque Sensor

RTS Series Reaction Torque Sensor

RTS Series Reaction Torque Sensor Specifications

RTS Series Reaction Torque Sensor Specifications

The RTS Series integrated overload stops are provided for both clockwise and counter-clockwise directions.

TEMECULA, CALIFORNIA, UNITED STATES, February 25, 2021 /EINPresswire.com/ — The RTS Series reaction torque sensor is offered in six ranges from 5 oz/in to 1,000 oz/in. Integrated overload stops are provided for both clockwise and counter-clockwise directions. The sensing element utilizes bonded foil strain gauges in a full Wheatstone bridge configuration, yielding excellent temperature compensation and long term reliability. The RTS features four tapped holes on either end to provide for simple mounting in most load cell utilized applications. The accuracy for combined nonlinearity and hysteresis is 0.1% of full scale and repeatability is 0.05%. Excitation voltage of 10 VDC is recommended.

https://www.transducertechniques.com

Transducer Techniques, established in 1979, designs and manufactures a complete line of load cells, torque sensors, special purpose transducers and related instrumentation. Transducer Techniques load cells are uniquely designed for weight and force measurement in such diversified applications as process control and factory automation. Other applications exist in numerous fields of science and industry for our load cells. All transducer sensing elements incorporate bonded foil strain gauges, wired in a full Wheatstone bridge configuration.

Technology
Load cells are electro-mechanical transducers that translate force or weight into voltage. This change in voltage produces a signal in the read-out instrumentation, a repeatable deflection or indication that can be calibrated directly in terms of the load applied to the load cell.

Construction
Construction of the load cell utilizes all the advantages of bonded foil strain gauges. Sealed within the load cell are sets of matched strain gauges bonded to a high strength element, machined to close tolerances. The strain gauges are electrically connected to form a balanced Wheatstone bridge and additional compensation resistors are added to the circuit for maintaining the accuracy of the bridge over a wide temperature range.

Operation
The principle of operation depends upon the deflection of the strain gauge filament, creating a change in its resistance, thereby unbalancing the bridge circuit. As a result, for a given input voltage, the output voltage of the bridge varies proportionally with the load and the change can be read on appropriate instrumentation.

Quality
When completed, each load cell is individually tested and calibrated. Each cell must meet or exceed rigid electrical and mechanical performance tests before it is released for service. Also, every cell is proof tested to its full rated capacity, and in most instances, to over its rated capacity.

Attributes
An important asset of our load cells is their extremely small deflection. The maximum deflection of standard cells does not exceed .012" at full load. This plus the fact that these load cells contain no moving parts opens unlimited application fields. The inherent compactness of the load cells minimizes installation problems.

The frequency response characteristics of our load cells are exceptionally good. The relatively low mass, and the small deflection under load, result in a high-frequency response which emphasizes the use of the load cells in many services where other transducers cannot perform.

Only strain gauges of the highest quality are installed and configured by technicians who have undergone our extensive training program targeting craftsmanship and attention to detail. To the end-user, this means a quality product. All Load Cells / Force Sensors and Torque Sensors are supplied with a Calibration Certificate traceable to NIST.

Customer Support
Transducer Techniques, LLC
+1 800-344-3965
email us here
Visit us on social media:
Facebook
Twitter


Source: EIN Presswire

New Keyless Latching HUB for 2021

Keyless Latching HUB 2SDB-L

New Keyless Latching HUB for 2021
HUB 2SDB-L

SAN DIEGO, CA, USA, February 25, 2021 /EINPresswire.com/ — USP has always set the standard for HUB quality throughout the industry. The full HUB line is manufactured with gold, silver and copper for maximum conductivity and corrosion resistance, with a current rating of 10 Amps, and a voltage rating of 125/250 volts. Button Locating Ridges are a HUB ™ exclusive. U.S. and World patents pending.

HUB-2SDB Hold-Up Buttons are a revolutionary product from the leader in the Emergency Hold-Up Buttons. With its compact size, sturdy construction, and solid electronics, HUB2SDB applications span everything from life-threatening notification to equipment emergency stop.
​They provide all of the added security of a latching switch with none of the hassle of reset tools and keys.

HUB-2SDB-L Push On-Push Off Hold Up Button
Push On/Push Off
No Reset Tool Required
DPDT with 6 Screw Terminals
12A @ 125VAC, 10A @ 250VAC, 1/2HP @ 125/250VAC
37C to 82C (-35F to 180F) Operating Temperature
Tactile Operation
100,000 (minimum) Service Life
UL/ULC
2.5" x 2.25" x 1.0" Two Part Housing with Button Locator Finger Guide
3-Point Mounting Holes for Under Counter, Wall, or Machine Mounting
Hand Soldered and Made in USA

Ted Greene President
United Security Products, Inc
+1 800-227-1592
email us here


Source: EIN Presswire

Colorado US Navy Veterans Lung Cancer Advocate Appeals to the Family of a Navy Veteran or Person in Colorado Who Had Exposure to Asbestos to Call Attorney Erik Karst of Karst von Oiste-Compensation Might Exceed $100,000

"Most Navy Veterans and or people who develop lung cancer after asbestos exposure prior to 1982-never get compensated-but they should as Erik Karst of Karst von Oiste will discuss at 800-714-0303. ”

— Colorado US Navy Veterans Lung Cancer Advocate

DENVER, COLORADO , USA, February 25, 2021 /EINPresswire.com/ — The Colorado US Navy Veterans Lung Cancer Advocate is appealing to the family of a Navy Veteran or person with recently diagnosed lung cancer in Colorado who had heavy exposure to asbestos in the Navy or at work decades ago to please call attorney Erik Karst of the law firm Karst von Oiste anytime at 800-714-0303 for a discussion about potential financial compensation-that might exceed $100,000. It does not matter if the person with lung cancer smoked cigarettes. There is a direct relationship between asbestos exposure and lung cancer. The typical person the advocate is trying to identify is over 60 years old. www.karstvonoiste.com/

The Advocate says, "Erik Karst of the law firm of Karst von Oiste is one of the nation's leading asbestos exposure compensation attorneys and he and his colleagues specialize in assisting people with lung cancer that was caused by asbestos exposure and or mesothelioma. Most Navy Veterans and or people who develop lung cancer after being exposed to asbestos prior to 1982-never get compensated-but they should. The $30 billion dollar-asbestos trust funds were set up for them too. If the person we have described sounds like your husband or dad anywhere in Colorado-please call attorney Erik Karst of Karst von Oiste to discuss compensation at 800-714-0303. We think you will be glad you did." www.karstvonoiste.com/

The Colorado US Navy Veterans Lung Cancer Advocate’s free services are available to people with asbestos exposure lung cancer or mesothelioma in Denver, Colorado Springs, Aurora, Fort Collins, Lakewood, Thronton, Pueblo, Greeley or anywhere in Colorado. https://Colorado.USNavyLungCancer.Com

High-risk work groups for exposure to asbestos in Colorado include US Navy Veterans, workers at Fort Carson, or Cheyenne Mountain, workers at one of Colorado’s 12 coal fired power plants, miners, manufacturing workers, public utility workers, plumbers, electricians, auto mechanics, machinists, or construction workers. In most instances, these types of workers were exposed to asbestos in the 1950’s, 1960’s, 1970’s, or 1980’s. https://USNavyLungCancer.Com

According to the American Cancer Society for nonsmokers who have been exposed to asbestos in their workplace the risk of lung cancer is five times that of unexposed workers. https://www.cdc.gov/cancer/lung/statistics/index.htm.

Important Note from the US Navy Veterans Lung Cancer Advocate: “If your husband, dad, coworker or neighbor has just been diagnosed with lung cancer and you know they had significant exposure to asbestos in the navy, at a shipyard or while working at a factory, at power plant, public utility, or as a plumber, electrician welder, mechanic or any kind of skilled trades group in any state please have them call us anytime at 800-714-0303. Most people like this never get compensated-even though the $30 billion dollar-asbestos trust funds were set up for them too. We are trying to change this sad fact. Frequently compensation for people like this might exceed $100,000." https://USNavyLungCancer.Com

States with the highest incidence of lung cancer include Kentucky, West Virginia, Maine, Tennessee, Mississippi, Ohio, Indiana, Louisiana, Arkansas, Missouri, North Carolina, Rhode Island, Alabama, and Delaware. However, there are people with asbestos exposure lung cancer in Colorado. www.karstvonoiste.com/

For more information about asbestos exposure please visit the NIH’s website on this topic:
https://www.cancer.gov/about-cancer/causes-prevention/risk/substances/asbestos/asbestos-fact-sheet.

Michael Thomas
Colorado US Navy Veterans Lung Cancer Advocate
+1 800-714-0303
email us here


Source: EIN Presswire

Illinois US Navy Veterans Mesothelioma Advocate Urges a Navy Submarine Veteran with Mesothelioma in Illinois to Call Attorney Erik Karst of Karst von Oiste About Financial Compensation-It Might Exceed a Million Dollars

"We are appealing to a Navy Veteran with this rare cancer to please call attorney Erik Karst of Karst von Oiste at 800-714-0303. Erik Karst specializes in assisting Navy Veterans with mesothelioma.”

— Illinois US Navy Veterans Mesothelioma Advocate

CHICAGO, ILLINOIS , USA, February 25, 2021 /EINPresswire.com/ — The Illinois US Navy Veterans Mesothelioma Advocate says, "We want a Navy Veteran with recently diagnosed mesothelioma in Illinois and or nationwide to receive the very best possible financial compensation results. Financial compensation for a Navy Veteran with mesothelioma might exceed a million dollars-especially if their asbestos exposure took place on a submarine. To get the compensation job done for a Navy Veteran we have endorsed, and we recommend attorney Erik Karst of the law firm of Karst von Oiste. Erik Karst is one of the nation's leading mesothelioma attorneys and he is always happy to discuss how the financial compensation works with a Navy Veteran or their family at 800-714-0303.

"We want to emphasize mesothelioma compensation is a one-shot deal and if a Navy Veteran with mesothelioma hires an inexperienced lawyer they might get shortchanged on compensation. As opposed to ordering a 'free' kit, guide, calculator, booklet, or other nonsense about mesothelioma-we are appealing to a Navy Veteran with this rare cancer or their family to please call attorney Erik Karst of Karst von Oiste at 800-714-0303. Erik Karst specializes in assisting Navy Veterans with mesothelioma compensation." www.karstvonoiste.com/

The Illinois US Navy Veterans Mesothelioma Advocate offers their free services to a US Navy Veterans with mesothelioma in Chicago, Springfield, Rockford, Peoria or anywhere in Illinois. https://Illinois.USNavyMesothelioma.Com

For the best possible mesothelioma treatment options in Illinois the Illinois Mesothelioma Victims Center strongly recommends the following heath care facilities with the offer to help a diagnosed victim, or their family get to the right physicians at each hospital:

* The University of Chicago Medicine Chicago: https://www.uchicagomedicine.org/cancer.

* Robert H. Lurie Comprehensive Cancer Center Chicago: https://www.cancer.northwestern.edu/.

About one third of all US citizens diagnosed with mesothelioma each year are Veterans of the US Navy. Before a Navy Veteran with mesothelioma or their family retain the services of a lawyer or law firm, they are urged to call the US Navy Veterans Mesothelioma Advocate anytime at 800-714-0303. https://USNavyMesothelioma.Com

The states with the highest incidence of mesothelioma include Maine, Massachusetts, Connecticut, Maryland, New Jersey, Pennsylvania, Ohio, West Virginia, Virginia, Michigan, Illinois, Minnesota, Louisiana, Washington, and Oregon. www.karstvonoiste.com/

For more information about mesothelioma please refer to the National Institutes of Health’s web site related to this rare form of cancer: https://www.cancer.gov/types/mesothelioma.

Michael Thomas
Illinois US Navy Veterans Mesothelioma Advocate
+1 800-714-0303
email us here


Source: EIN Presswire

Registration is now open for SMi Group’s 2nd annual Future Armored Vehicles: Protection Systems USA 2021

Future Armored Vehicles: Protection Systems USA 2021

Future Armored Vehicles: Protection Systems USA 2021

SMi Reports: Registration is now open for the Future Armored Vehicles: Protection Systems USA, which returns as a virtual conference this June.

LONDON, LONDON BRIDGE , UNITED KINGDOM, February 25, 2021 /EINPresswire.com/ — The highly anticipated Future Armored Vehicles: Protection Systems USA will return for its 2nd year on June 10th and 11th 2021.

As a leading conference focusing on the software developments within vehicle protection systems, delegates can anticipate exclusive updates from leading military and industry experts on topics such as; modular technology, hard/soft kill systems, integrated mission systems and the future of the technology, data management considerations many more.
The two-day event will provide unique briefings on the development and integration of Active Protection Systems, as well as the wider vehicle protection suites employed by armed forces around the world.

2021 SPEAKERS INCLUDE:

US EXPERT MILITARY AND TECHNICAL SPEAKERS:
• Mr David W. Marck, Project Director Main Battle Tanks Systems (MBTS), PEO Ground Combat Systems
• Mr William Norton, Ground Vehicle Systems Center, Survivability and Protection, Chief Engineer, PM Abrams APS SME support, CCDC, US Army
• Project Manager, Vehicle Protection Systems, PEO Ground Combat Systems, US Army
• Colonel Kevin Chaney, PM Aircraft Survivability Equipment, PEO IEWS, US Army
• Lieutenant Colonel Roei Siman Tov, APS Expert, Israel Defence Forces (IDF)
• Mr Tom Newbery, Active Protection Research Technical Authority, Dstl, UK MoD
• Mr Rob Baker, Defence Science and Technology Group, Discipline Lead, Advanced Vehicle Protection, Australian Defence Forces
• Lieutenant Colonel Scott Coulson, Owner and Founder, Mass XV LLC
• Representative, Cross Functional Team, NGCV, US Army Futures Command
• Major General Bill Hix -Former Director of Strategy, Plans & Policy, Deputy Chief of Staff G-3/5/7, US Army

Hear from industry leaders testing, developing and applying the cutting-edge technology that will be used by armored brigades for years to come.

Register at http://www.fav-aps.com/einpr1
Attendance is FREE for military and government personnel, $499 for International and just $999 for commercial organisations.

Proudly Sponsored by Leonardo DRS

For all media inquiries contact Jinna Sidhu on Tel: +44 (0)20 7827 6088 or Email: hsidhu@smi-online.co.uk

–END—

About SMi Group:
Established since 1993, the SMi Group is a global event-production company that specializes in Business-to-Business Conferences, Workshops, Masterclasses and online Communities. We create and deliver events in the Defence, Security, Energy, Utilities, Finance and Pharmaceutical industries. We pride ourselves on having access to the world’s most forward-thinking opinion leaders and visionaries, allowing us to bring our communities together to Learn, Engage, Share and Network. More information can be found at http://www.smi-online.co.uk.

Jinna Sidhu
SMi Group
02078276088
email us here


Source: EIN Presswire

Designed for Harsh Industrial Environments the HSW Series Load Cells Offer Resistance to Washdown and Most Chemicals

CAL-TEDS Plug & Play Smart Sensors Icon

CAL-TEDS Plug & Play Smart Sensors Icon

HSW Series Load Cell

HSW Series Load Cell

HSW Series Universal Load Cell Specifications

HSW Series Universal Load Cell Specifications

These hermetically sealed universal load cells offer engineers high accuracy, low deflection, and fast frequency response.

TEMECULA, CALIFORNIA, UNITED STATES, February 24, 2021 /EINPresswire.com/ — The HSW Series load cells are offered to support use in harsh industrial locations. The hermetically sealed load cell HSW is manufactured using 17-4ph heat-treated stainless steel offering high accuracy, low deflection, fast frequency response and good output compliance between tension and compression loading. A stainless steel molded connector system is incorporated to resist wash down and most chemicals. Capacities range from 1,000 to 50,000 pounds. Visit our website to learn more about Hermetically Sealed Universal Load Cells.

https://www.transducertechniques.com

Transducer Techniques, established in 1979, designs and manufactures a complete line of load cells, torque sensors, special purpose transducers and related instrumentation. Transducer Techniques load cells are uniquely designed for weight and force measurement in such diversified applications as process control and factory automation. Other applications exist in numerous fields of science and industry for our load cells. All transducer sensing elements incorporate bonded foil strain gauges, wired in a full Wheatstone bridge configuration.

Technology
Load cells are electro-mechanical transducers that translate force or weight into voltage. This change in voltage produces a signal in the read-out instrumentation, a repeatable deflection or indication that can be calibrated directly in terms of the load applied to the load cell.

Construction
Construction of the load cell utilizes all the advantages of bonded foil strain gauges. Sealed within the load cell are sets of matched strain gauges bonded to a high strength element, machined to close tolerances. The strain gauges are electrically connected to form a balanced Wheatstone bridge and additional compensation resistors are added to the circuit for maintaining the accuracy of the bridge over a wide temperature range.

Operation
The principle of operation depends upon the deflection of the strain gauge filament, creating a change in its resistance, thereby unbalancing the bridge circuit. As a result, for a given input voltage, the output voltage of the bridge varies proportionally with the load and the change can be read on appropriate instrumentation.

Quality
When completed, each load cell is individually tested and calibrated. Each cell must meet or exceed rigid electrical and mechanical performance tests before it is released for service. Also, every cell is proof tested to its full rated capacity, and in most instances, to over its rated capacity.

Attributes
An important asset of our load cells is their extremely small deflection. The maximum deflection of standard cells does not exceed .012" at full load. This plus the fact that these load cells contain no moving parts opens unlimited application fields. The inherent compactness of the load cells minimizes installation problems.

The frequency response characteristics of our load cells are exceptionally good. The relatively low mass, and the small deflection under load, result in a high-frequency response which emphasizes the use of the load cells in many services where other transducers cannot perform.

Only strain gauges of the highest quality are installed and configured by technicians who have undergone our extensive training program targeting craftsmanship and attention to detail. To the end-user, this means a quality product. All Load Cells / Force Sensors and Torque Sensors are supplied with a Calibration Certificate traceable to NIST.

Customer Support
Transducer Techniques, LLC
+1 800-344-3965
email us here
Visit us on social media:
Facebook
Twitter


Source: EIN Presswire

Presenting the TLL Series, an Economical Method for Accurately Measuring Inline Tension Forces

CAL-TEDS Plug & Play Smart Sensors Icon

CAL-TEDS Plug & Play Smart Sensors Icon

TLL Series Load Cell

TLL Series Load Cell

TLL Series Tension Load Cell

TLL Series Tension Load Cell

The TLL Series offers load cells that can accurately measure inline tension forces in ranges of 500 to 50,000 pounds.

TEMECULA, CALIFORNIA, UNITED STATES, February 24, 2021 /EINPresswire.com/ — The TLL Series tension load cells are offered as an economical method for accurately measuring in-line tension force. Best results with our TLL tension link load cell are obtained when loaded through spherical rod end bearings or similar universal mechanical linkage. The 500 through 3,000 pound ranges are constructed using anodized aluminum and feature internal threads, while the 5,000 through 50,000 pound ranges are manufactured using heat treated 17-4ph stainless steel and feature external threads. The nominal full scale output of the TLL Series is 2 mV/V with accuracies of Nonlinearity 0.25%, Hysteresis 0.25%, and Nonrepeatibility 0.1%. The sensing element and cable exit is moisture resistant for semi-controlled environments. The TLL Series are also supplied with a Certificate of Calibration traceable to NIST.

https://www.transducertechniques.com

Transducer Techniques, established in 1979, designs and manufactures a complete line of load cells, torque sensors, special purpose transducers and related instrumentation. Transducer Techniques load cells are uniquely designed for weight and force measurement in such diversified applications as process control and factory automation. Other applications exist in numerous fields of science and industry for our load cells. All transducer sensing elements incorporate bonded foil strain gauges, wired in a full Wheatstone bridge configuration.

Technology
Load cells are electro-mechanical transducers that translate force or weight into voltage. This change in voltage produces a signal in the read-out instrumentation, a repeatable deflection or indication that can be calibrated directly in terms of the load applied to the load cell.

Construction
Construction of the load cell utilizes all the advantages of bonded foil strain gauges. Sealed within the load cell are sets of matched strain gauges bonded to a high strength element, machined to close tolerances. The strain gauges are electrically connected to form a balanced Wheatstone bridge and additional compensation resistors are added to the circuit for maintaining the accuracy of the bridge over a wide temperature range.

Operation
The principle of operation depends upon the deflection of the strain gauge filament, creating a change in its resistance, thereby unbalancing the bridge circuit. As a result, for a given input voltage, the output voltage of the bridge varies proportionally with the load and the change can be read on appropriate instrumentation.

Quality
When completed, each load cell is individually tested and calibrated. Each cell must meet or exceed rigid electrical and mechanical performance tests before it is released for service. Also, every cell is proof tested to its full rated capacity, and in most instances, to over its rated capacity.

Attributes
An important asset of our load cells is their extremely small deflection. The maximum deflection of standard cells does not exceed .012" at full load. This plus the fact that these load cells contain no moving parts opens unlimited application fields. The inherent compactness of the load cells minimizes installation problems.

The frequency response characteristics of our load cells are exceptionally good. The relatively low mass, and the small deflection under load, result in a high-frequency response which emphasizes the use of the load cells in many services where other transducers cannot perform.

Only strain gauges of the highest quality are installed and configured by technicians who have undergone our extensive training program targeting craftsmanship and attention to detail. To the end-user, this means a quality product. All Load Cells / Force Sensors and Torque Sensors are supplied with a Calibration Certificate traceable to NIST.

Customer Support
Transducer Techniques, LLC
+1 800-344-3965
email us here
Visit us on social media:
Facebook
Twitter


Source: EIN Presswire

Transducer Techniques' CLP Series Load Pins Offer Force Measurement Solutions for Pulley Shaft bolts, and Clevis Pins

CAL-TEDS Plug & Play Smart Sensors Icon

CAL-TEDS Plug & Play Smart Sensors Icon

CLP Series Load Pin Load Cell

CLP Series Load Pin Load Cell

CLP Series Load Pin Load Cell Specifications

CLP Series Load Pin Load Cell Specifications

With force ranges between 1,500 and 200,000 pounds the CLP Series load pins are suitable for a variety of industrial applications.

TEMECULA, CALIFORNIA, UNITED STATES, February 24, 2021 /EINPresswire.com/ — The CLP Series load pins are frequently used where mounting pins or large bolts are supporting a load. Typical applications include pulley shaft bolts, clevis pins and shackle pins. The CLP series load pin load cells are manufactured using heat-treated 17-4ph stainless steel. The CLP Series load cell utilizes a stainless steel molded connector system is incorporated to support use in harsh industrial environments. For a wide range of applications, twelve capacity ranges are available from 1,500 to 200,000 pounds.

https://www.transducertechniques.com

Transducer Techniques, established in 1979, designs and manufactures a complete line of load cells, torque sensors, special purpose transducers and related instrumentation. Transducer Techniques load cells are uniquely designed for weight and force measurement in such diversified applications as process control and factory automation. Other applications exist in numerous fields of science and industry for our load cells. All transducer sensing elements incorporate bonded foil strain gauges, wired in a full Wheatstone bridge configuration.

Technology
Load cells are electro-mechanical transducers that translate force or weight into voltage. This change in voltage produces a signal in the read-out instrumentation, a repeatable deflection or indication that can be calibrated directly in terms of the load applied to the load cell.

Construction
Construction of the load cell utilizes all the advantages of bonded foil strain gauges. Sealed within the load cell are sets of matched strain gauges bonded to a high strength element, machined to close tolerances. The strain gauges are electrically connected to form a balanced Wheatstone bridge and additional compensation resistors are added to the circuit for maintaining the accuracy of the bridge over a wide temperature range.

Operation
The principle of operation depends upon the deflection of the strain gauge filament, creating a change in its resistance, thereby unbalancing the bridge circuit. As a result, for a given input voltage, the output voltage of the bridge varies proportionally with the load and the change can be read on appropriate instrumentation.

Quality
When completed, each load cell is individually tested and calibrated. Each cell must meet or exceed rigid electrical and mechanical performance tests before it is released for service. Also, every cell is proof tested to its full rated capacity, and in most instances, to over its rated capacity.

Attributes
An important asset of our load cells is their extremely small deflection. The maximum deflection of standard cells does not exceed .012" at full load. This plus the fact that these load cells contain no moving parts opens unlimited application fields. The inherent compactness of the load cells minimizes installation problems.

The frequency response characteristics of our load cells are exceptionally good. The relatively low mass, and the small deflection under load, result in a high-frequency response which emphasizes the use of the load cells in many services where other transducers cannot perform.

Only strain gauges of the highest quality are installed and configured by technicians who have undergone our extensive training program targeting craftsmanship and attention to detail. To the end-user, this means a quality product. All Load Cells / Force Sensors and Torque Sensors are supplied with a Calibration Certificate traceable to NIST.

Customer Support
Transducer Techniques, LLC
+1 800-344-3965
email us here
Visit us on social media:
Facebook
Twitter


Source: EIN Presswire

From Transducer Techniques the TMO-1 Load Cell Module is a Complete Differential Amplifier and Signal Conditioner

CAL-TEDS Plug & Play Smart Sensors Icon

CAL-TEDS Plug & Play Smart Sensors Icon

TMO-1 Load Cell Conditioner

TMO-1 Load Cell Conditioner

The TMO-1 offers engineers support for load cells or torque sensors in remote or behind-panel applications.

TEMECULA, CALIFORNIA, UNITED STATES, February 24, 2021 /EINPresswire.com/ — The TMO-1 Load Cell Module is a complete differential load cell amplifier/signal conditioner that supports load cells or torque sensors in remote or behind-panel applications. The TMO-1 module provides bridge excitation, and easy balance and span adjustments via precision ten (10) turn pots. Due to low power consumption, several TMO-1 modules can be powered by one power supply. Simple push button shunt calibration is built-in for quick scaling to engineering units. The TMO-1 module's small size makes it easy to mount in areas where space is limited. Please visit our website for input voltage and filtering options.

https://www.transducertechniques.com

Transducer Techniques, established in 1979, designs and manufactures a complete line of load cells, torque sensors, special purpose transducers and related instrumentation. Transducer Techniques load cells are uniquely designed for weight and force measurement in such diversified applications as process control and factory automation. Other applications exist in numerous fields of science and industry for our load cells. All transducer sensing elements incorporate bonded foil strain gauges, wired in a full Wheatstone bridge configuration.

Technology
Load cells are electro-mechanical transducers that translate force or weight into voltage. This change in voltage produces a signal in the read-out instrumentation, a repeatable deflection or indication that can be calibrated directly in terms of the load applied to the load cell.

Construction
Construction of the load cell utilizes all the advantages of bonded foil strain gauges. Sealed within the load cell are sets of matched strain gauges bonded to a high strength element, machined to close tolerances. The strain gauges are electrically connected to form a balanced Wheatstone bridge and additional compensation resistors are added to the circuit for maintaining the accuracy of the bridge over a wide temperature range.

Operation
The principle of operation depends upon the deflection of the strain gauge filament, creating a change in its resistance, thereby unbalancing the bridge circuit. As a result, for a given input voltage, the output voltage of the bridge varies proportionally with the load and the change can be read on appropriate instrumentation.

Quality
When completed, each load cell is individually tested and calibrated. Each cell must meet or exceed rigid electrical and mechanical performance tests before it is released for service. Also, every cell is proof tested to its full rated capacity, and in most instances, to over its rated capacity.

Attributes
An important asset of our load cells is their extremely small deflection. The maximum deflection of standard cells does not exceed .012" at full load. This plus the fact that these load cells contain no moving parts opens unlimited application fields. The inherent compactness of the load cells minimizes installation problems.

The frequency response characteristics of our load cells are exceptionally good. The relatively low mass, and the small deflection under load, result in a high-frequency response which emphasizes the use of the load cells in many services where other transducers cannot perform.

Only strain gauges of the highest quality are installed and configured by technicians who have undergone our extensive training program targeting craftsmanship and attention to detail. To the end-user, this means a quality product. All Load Cells / Force Sensors and Torque Sensors are supplied with a Calibration Certificate traceable to NIST.

Customer Support
Transducer Techniques, LLC
+1 800-344-3965
email us here
Visit us on social media:
Facebook
Twitter


Source: EIN Presswire

General strike in Saravan, clashes between the people, Revolutionary Guards continue; IRGC base captured

24 Feb 2021 - Saravan Uprising 1

More than 40 protesters killed, over 100 wounded; death toll on the rise

More than 40 protesters killed, over 100 wounded; death toll on the rise”

— NCRI

PARIS, FRANCE, February 24, 2021 /EINPresswire.com/ — Following clashes between the Revolutionary Guards (IRGC) and the people of Saravan in recent days, which left at least 40 protesters killed and more than 100 wounded, today, February 24, 2021, rebellious youths in the Korin-Sarjangal area of Zahedan (Capital of Sistan and Baluchestan Province) took to the streets and targeted the IRGC base in the region. After blocking the road leading to the base, they captured the base despite coming under fire by the Guards. Protesters set fire to several Revolutionary Guards vehicles.

In another development, this morning, many businesses and shopkeepers in Zahedan, Iranshahr, Khash, Sarbaz, and elsewhere. closed their shops and went on strike in protest against the Saravan massacre. Fearing the spread of the uprising and protests, the repressive forces, stationed in various locations across the cities, are on full alert.

On February 22 clashes between the deprived people of Saravan and the Revolutionary Guards and the security forces had left dozens of fuel porters and young people in the city dead or wounded. The suppressive forces fired live rounds and tear gas to disperse the crowd, but were met with resistance by the enraged residents who took over the Governor’s Office. Reports say that many at least 40 protesters were killed and more than 100 were wounded.

A group of demonstrators gathered in front of the Quds Garrison of the IRGC's Ground Forces, but the Revolutionary Guards opened fire. The clashes left more people dead and injured, and bullets also hit passing by vehicles.

The IRGC called in for reinforcement of the heavily-armed border guards, known as Mersad, who came in from Zahedan, Khash and other cities with dozens of vehicles and opened fire on the crowd using heavy machine guns mounted on Tanks. The IRGC also set fire to dozens of vehicles with which the porters transferred their fuel.

According to medical sources, Razi Hospital in Saravan is facing severe blood shortages but the regime is preventing medical help. The authorities have cut off or disrupted Saravan's internet in order to prevent the spread of the news of the uprising. They have also blocked all the roads to the city.

The names of a number of Saravan martyrs are: Yahya Gangozehi (son of Ali Khan), Abdolrahman Shahrsan Zehi, Abdi Shahrsan Zehi (son of Baharshah), Salman Shahrsan Zehi, Rahman Bakhsh Dehvari (son of Baharshah), Abdul Wahab Damani, Ons Sahebzadeh, Abdul Ghafoor Totazahi, Mohammad Mirblouch Zehi, and the 17-year-old Mohammad Nosrat Zehi (son of Bashir).

Mrs. Maryam Rajavi, the President-elect of the National Council of Resistance of Iranian (NCRI), saluted the brave and rebellious Baluchi compatriots in Saravan, Korin, Zahedan, Khash, Iranshahr, and other cities of Sistan and Baluchestan who have revolted against the criminal Revolutionary Guards. She said the only way to confront oppression, discrimination, poverty, inflation, and unemployment is to rise up against the evil regime of the Velayat-e-Faqih. She called on the public, especially in neighboring cities and provinces, to support the protesters.

Shahin Gobadi
NCRI
+33 6 50 11 98 48
email us here
Visit us on social media:
Twitter

General strike in Saravan, clashes between the people, Revolutionary Guards continue


Source: EIN Presswire